WHILST MOST of the lift equipment is contained within the shaft, there are also some components located outside it. For hydraulic lifts (E1 and E2), there is a hydraulic tank unit as well as a wall mounted electrical/controller cabinet requiring a space of approx 700mm wide x 500mm deep x 1800mm high. We can also supply a fully enclosed cabinet in which to house this equipment.

For the traction driven T2, all the components are contained within a slim cabinet of only 420mm wide x 215mm deep x 2100mm high.

All the electrical and other requirements for these areas are documented within our quotes as well as within this respective section for each product, eg T2 but please don’t hesitate to contact any of our Sales or Operations staff if you have any questions.