SUPPLYING ELEVATORS for four new homes in a row, this was just one of the unique specifications selected. Installed into a one glass-sided shaft overlooking a unique custom steel staircase, the specifications were as follows: Mono V3 landing doors – RAL 9007...
Hiding in Plain Sight WITH ACCESS convenience at the push of a button hidden behind a well disguised wall of veneer cabinetry this elevator is as visible and usable as wanted. Keeping a simple and classy fitout of F12PPS similinox skinplate with offsetting polished...
WITH SPACIOUS rooms throughout in this graceful circa 1862 home, it was only logical that the renovation also included a spacious elevator too, in this case a 1280mm (50.3″) wide x 1250mm (49.2″) deep adjacent through car E1. Blending in perfectly from the...
FITTING AN outdoor lift and glass shaft between two solid building forms required precise measuring instructions for our manufacturer in Italy. As can be seen from the pictures, this was achieved with maximum use of the space available – looks like it must have...
WITH ONLY minimal impact on a downstairs office and none at all in the upstairs living areas, we were delighted to install a 2 stop opposite through car E1 and glass shaft in this charming home. With maximum use of glass on the shaft, doors and cabin, full visibility...
MAKING A significant design statement, this new Sandringham home has an E1 with glass shaft providing both practical access as well as an eye-catching vision from most vantage points on the three levels. Being in such a prominent location, the selection of correct...
PROVIDING SIMPLE access between the lower and upper levels of the outdoor area of the new development, the P2 was the perfect choice. With a stylish powdercoated anthracite frame, clear glass side and gate panels and a weather resistant aluminium checkerplate floor,...
COLLABORATING AGAIN with the experienced team from Concept Build (see also Gal to Glam) it was a pleasure to be involved in the restoration of this Princes Hill residence. Serving all three levels of the home, the cabin was fitted out with polished black stainless...
WHILST PRACTICAL and easily accessible, the design for this large 1100mm (43.3″) wide x 1400mm (55.1″) deep elevator was stylishly fitted out with F12PPS similinox skinplate and contrasting brushed stainless steel fittings. To accentuate the spacious...
HARD TO tell but the lift and glass shaft is actually a retrofit to an existing home on Queensland’s Sunshine Coast. Designed to match the various angles of the home’s contours, the E1 and glass shaft has been added to the outside of the home whilst still sitting...
Precision Plus HOW DO you install an elevator into a partial steel shaft sitting on top of a masonry shaft surrounded by a wrap-around circular staircase – very carefully !! But that’s ok – it’s what we do. Designing in collaboration with all parties from the outset,...
Fremantle Freedom OVERLOOKING THE River, the attention to detail in this new 3 level home has been carried through to every finish and inclusion. No less than the glass FreedomLift. Making the most of the slimline profiles and maximum glass wall panels, the glass...
Hand in Glove MEETING THE client’s specific design brief to source from our two main suppliers, Elevatori Premontati (Italy) and DNDT (China) we installed a 3 stop adjacent through car E1 into a glass and aluminum shaft. The end result has been nothing short of...
BEING COMPLETELY happy with his last elevator, this builder didn’t look any further for his new home. This spacious 1200mm (47.2″) x 1200mm (47.2″) E1 cabin was fitted out in polished stainless steel profiles, mirrored walls and a custom stone floor. The...
Tight Space – No Problem THIS GRAND 100 year old property in the exclusive Sydney suburb of Bellevue Hill was missing one key function, a lift to the second floor. With the owners wanting to stay in the property for many more years to come and the stairs...
AS PARTof our strategy to further grow our Victorian market, both Ian and Kristian met with over 200 Architects, builders and designers at the recent ARC event held at Melbourne’s town hall. Over a few drinks and canapés they caught up with both new and existing...
ONCE OUR lifts arrive in Australia and clear customs, the materials are delivered to one of our warehouses in either Sydney, Melbourne, Brisbane or Perth. Here we unpack directly from the containers shipped from the overseas manufacturers and arrange delivery to site...
A STANDARD requirement for our lift installation is provision of a raw door opening that is 20mm wider on each side and also above the door frame. This allows some flexibility with the installation and caters for openings slightly out of plumb. Once the door and frame...