MAXIMUM GLASS shaft with striking architectural structural details was the brief for this outstanding project in Sydney’s McMahons Point. As the configuration for the 3 stop E1 was adjacent through car, the opportunity to have frameless glass landing doors on more...
MAXIMUM APPEAL and a standout statement was provided with the inclusion of this 4 level single entry E1 elevator and glass shaft. Keeping the overall footprint to an absolute minimum, our state of the art custom manufacturing provided a cabin size of 600mm...
THIS INTERESTING new home in Santa Barbara was designed with curves everywhere, from the outside of the home to the hallways inside. As such, the 2 level E1 elevator provided a striking contrast with its obvious straight lines design. No problem, our high level of...
ENJOYING AN elevated position close to Brisbane, this futuristic designed builder’s own home has been finished to a very high end level of detail. Not the least of these details being the 3 level E1 and the finishes selected for it. The anodised aluminium doors with...
THIS LIFT installation is pure class inside and out – RAL 9011 matt finish P1 Max doors with black glass panoramic infills, full height bevelled mirror to the rear wall, both side walls and profiles in bronzo satinato stainless steel, led spotlights in a gloss white...
OVERLOOKING PORT Phillip Bay in Melbourne’s Brighton, this stunning home exudes clean modern lines and the lift held its side of the bargain too. The 2 stop E1 was sized to suit with a 940mm wide x 1150mm car size, 300kg load capacity and fastest speed of 0.3m/s. The...
A LABOUR of love for this new build in Melbourne’s Fairfield has also included internal access from the garage to the two levels of the home. On first entering the lift at the lower level, an outstanding colourful vision of a cave scene applied to the rear wall of the...
Topping Up THE ORIGINAL installation here was for a 3 level E1 but by the time the elevator was ready to be handed over, the owners had received Council approval to extend the home one level higher. As such, additional materials were ordered and the original...
WITH INPUT from the owners, builders and Lift Shop, the perfect location to provide access between floors with minimal disruption was chosen. In this case the solution was a glass shaft and E1 lift sitting outside the home and tucked into a discrete corner. Making the...
IT WAS a real treat to hand this one over. After several years of discussions and then finally getting things underway to install a lift into an existing penthouse apartment in this prestigious Gold Coast development, the final result could not be better or more in...
DONE TO perfection, this stylish new home in Sydney’s Eastern Suburbs spanned four levels so a lift was a necessity, especially as the garage level serves as the sensible entry point to the home. With a very spacious cabin of 1200mm wide x 1300mm deep, the adjacent...
SITTING IN the centre of this modern new 3 level home, the frameless glass shaft and lift takes pride of place with the wraparound timber staircase – the choices to go between floors could not be easier. The ElfoLift in this case included primed steel and glass doors...
WHEN THE owners first designed and built their home ten years ago, they had the vision and foresight to build a lift shaft at the time. Whilst the owners had the advantage of having extra storage at each level during this period (simple as building false floors at...
FOR A makeover of this charming Queenslander in Shorncliffe, a few original walls were retained but not much else. As such, a complete makeover would not have been complete without including all the mod cons, including a three level opposite through car ElfoLift. A...
WHEN THE owners designed a whole new wing to their character filled home, they ensured that the new 2 level extension also included an ElfoLift as a sensible future-proofing measure. To accommodate the lift installation, a very well-engineered steel structure was...
MORE AND MORE it is becoming commonplace to just include a lift into the overall design of new homes that span +2 levels. This was the case for this new home in a Brisbane suburb and with a clean and practical selection of colours and finishes, the lift blends in...
NINE YEARS after we first started talking to the clients of this modern upscale home in Brisbane’s Teneriffe, we finally installed a three level ElfoLift and steel and glass shaft. From initial discussions to the final plans, the end design didn’t differ greatly, it...
FOR THIS existing home in Melbourne, adding a brick shaft to the rear of the garage to provide access to the upper level was way too easy. To best suit the floorplan, an adjacent through car configuration was the best layout. The ElfoLift has been supplied with...
AFTER VIEWING our showroom, the owners were taken with the idea of having two milk glass cabin walls with Similinox skinplate profiles and one striking feature wall from our Arpa range – in this case they chose the 9206 VG LUC, looks awesome. Other specifications for...
ENJOYING ALMOST everything about their cherished beachfront home in Black Rock, the owners only problem was coping with the stairs between the two levels. No problem whatsoever – ElfoLift and Steel and Glass shaft and nothing to worry about. The clever design for this...
FUTURE PROOFING was important in the design of this new duplex dwelling in the Melbourne suburb of Hampton so it was only natural that an ElfoLift was also included from the outset. With a modest cabin of 860mm wide x 880mm deep, the still generous load capacity of...
THE SEMI-RURAL town of Plenty in the outskirts of Melbourne lends itself to large spacious lots and equally spacious residences. But for this particular property, the only thing it lacked was easier access between the two levels of the home. With discussions and...
WITH A solid structure offered by this former commercial/warehouse building, the owners capitalised on the opportunity to convert the building into an AMAZING private residential dwelling. With an emphasis on retaining the already present dominant features of face...
THIS SPACIOUS new home in Perth’s City Beach has been finished to the finest level of detail and precision. As such it was a huge privilege to have our ElfoLift sitting in prime position with two levels of the lift visible from the front door (and also extending down...
With the love of the Hamptons style, the owners replicated the same design for their new home in Mount Claremont. To ensure easy access between the two levels would never be a problem, Elevator Boutique’s E1 swing door home elevator was specified in. In order to make...
This spacious new home was designed with convenience in mind. As such, it was easy for the owners and their architect to select the E1 swing door home elevator. As well as having a wraparound set of glass stairs facing a glass wall overlooking the swimming pool, the...
INTERESTING ON every level – this sawtooth factory in Collingwood was converted into a multi-level luxury home. With an emphasis on natural elements such as face brick, timber and steel, the custom designed ElfoLift fitted in beautifully, including a rear glass cabin...
FOR THIS contemporary new townhouse development in Melbourne’s Brighton, we installed seven ElfoLifts, each one spanning three levels. Consistent with the modern décor throughout, each cabin was fitted out completely with our latest skinplate, F41PPS which provides...
THE ABILITY to blend the ElfoLift into an existing home in a discrete way that looks like it has always been there has never been truer than in this retrofit to a lovely cherished family home. Spanning two levels, the car was fitted with the ever popular clean and...
Planning Ahead WHEN THIS home in Shelly Beach was built the owners had the foresight to build a hoistway at the same time. Located on the side of the home, the hoistway then sat there in waiting until such time as it was needed. Fast forward a few years later and the...
